How to flash Stock ROM using DFU

These are instructions on Flash Stock ROM on Android Devices using Broadcom Download Firmware Utility (DFU).

Requirements: Your Android Smartphone should have at least 40-50 percent of battery to perform the Flashing Process.

Flash stock ROM using Broadcom Download Firmware utility

1-Download the Broadcom USB driver for your device and install it on your Windows computer. If you have already installed USB drivers for your device, then skip this step.

How to flash Stock ROM using DFU

2Download the Broadcom Firmware Download utility and download it to your computer. After extracting, you will see the following files.

How to flash Stock ROM using DFU

3-Power Off your Android Device.

How to flash Stock ROM using DFU

4-Download the stock ROM you want to flash on your Android device and extract it to your computer.

How to flash Stock ROM using DFU

5-Now open dfu.exe (You extracted this file on your computer in step 2.

How to flash Stock ROM using DFU

6-Once the Broadcom Firmware Download utility has started, click on the Browse button at the top right corner and locate the Firmware folder.

How to flash Stock ROM using DFU
flash Stock ROM using DFU

7- Once you have successfully found a DFU compatible firmware folder, it will automatically appear in the DFU (Broadcom Download Firmware) tool.

How to flash Stock ROM using DFU

8- After the firmware has been successfully added to the DFU tool, tap on the download menu.

How to flash Stock ROM using DFU

9- Now click on the Start button to start flashing.

How to flash Stock ROM using DFU

10-Now connect your Android smartphone based on Broadcom chipset to your computer (make sure it is turned off)

How to flash Stock ROM using DFU

11-After connecting your device to the computer, press the volume down button on your device so that the Firmware Download Utility (DFU) can be detected.

12-As soon as the Broadcom Download Firmware (DFU) utility detects your device, the flash process will start automatically

How to flash Stock ROM using DFU

13-When flashing is complete, a Finish message is displayed

14-Now close Broadcom Firmware Download Application and disconnect your Android device from the computer.

Congratulations, the stock ROM you downloaded is now running successfully on your Android device.

Leave a Reply

Your email address will not be published.