Download & How to Flash Qcom Phone Download Tool

How to Flash Stock ROM using Qcom Phone Download Tool

These are the step-by-step instructions on how to flash Stock ROM using Qcom Phone Download Tool on Qualcomm-based Android phones and tablets.qcom phone download tools

Before proceeding to the instructions on how to flash Stock firmware using Qcom Phone Downloader, it is recommended to follow the below-mentioned preparation steps for a smoother flashing process.

Preparation:

  • Backup all of your important data to a safe place as flashing firmware wipes all of your data and settings.
  • Make sure your Android device is charged to at least 50% battery before proceeding to flash the firmware.

How to use Qcom Phone Download Tool to Flash Android Firmware

Step 1Download and install the suitable Android USB Driver on your computer. If you already have the drivers installed on your computer, then you can skip this step.

usb - How to Flash Stock ROM using Qcom Phone Download Tools

Step 2Download Android Stock Firmware for your Android phone or tablet from here on to your computer.

Step 3Download and extract the Qcom Phone Download Tool on your computer. After extracting, you will see the following files.

Qcom Phone Download Tools Files - How to Flash Stock ROM using Qcom Phone Download Tools

Step 4: Now open “GN_Qcom_Download_Tools.exe” that you have extracted in Step #3.

Open Qcom Phone Download Tools - How to Flash Stock ROM using Qcom Phone Download Tools
Qcom Phone Download Tool

Step 5: Once the Qcom Phone Download Tool launches, you will see the following screen.

Qcom Phone Downloader

Step 6: Now, click on the drop button from the top right corner and select “English” as the language.

Qcom Phone Download Tool English

Step 7: Now, under UpDataType select Save Production Data.

Qcom Phone Download Tools UpDataType

Step 8: Now click on the SoftPath Browse [] button and locate the firmware folder that you want to flash on your Android phone or tablet.

Qcom Phone Downloader SoftPath Browse

Qcom Phone Download Tool Select Firmware Folder

Step 9: Now click on the “Start Download” button.

Qcom Download Tool Start Download

Step 10: Now Power off your phone and connect it to the computer using a USB data cable.

Connect Mobile to Computer - How to Flash Stock ROM using Qcom Phone Download Tools

Step 11: Once your phone is successfully connected to the computer, the flashing process should start automatically.

Qcom Download Tool Waiting

Step 12: Once the flashing process is completed, you will see the Pass message in Qcom Phone Downloader.

Step 13: Now close the Qcom Phone Download Tool and disconnect your device from the computer and reboot it.

Congratulations, now you have successfully flashed Stock firmware using Qcom Phone Download Tool on an Android smartphone or tablet.

Leave a Reply

Your email address will not be published.